[WWI] Loyd CII

[Crawford Neil]

I don't think I'd bother with brass seats as they are really easy
to make out of plastic, but make up the brass ones, and if they look good use them.
Akita wheels are good, check the diameter against drawings, if the diameter is
correct use them. Be careful when aligning the the two sides of the wheels so that 
the spokes don't correspond, the spokes on one side should be between the spokes 
on the other side or they look wrong. If you use CA you can get them apart by 
burning in a flame. I built up the tires with Mr. Surfacer, and then you don't even need to 
paint them.
/Neil

> -----Original Message-----
> From: wwi-bounces at wwi-models.org 
> [mailto:wwi-bounces at wwi-models.org] On Behalf Of Stephen Campton-Jones
> Sent: den 2 februari 2010 10:38
> To: World War I Modeling Mailing List
> Subject: [WWI] Loyd CII
> 
> I have started my first vac in about 10 years.
> I need a little help. 
> Has anybody got any pictures etc of a Lloyd CII?
> I have some WW1 brass seats - Libramodels set 002
> I have some WW1 brass wheels - Akita set AV1
> Are they any good for a Lloyd?
> The kit I have is a Joystick Model.
> Thank you for any help.
> Stephen
> 
> 
> 
> 
>