[WWI] Wingnut LVG C VI rigging question

[James and Linda Fahey]

. . . and this is where the hole is on the kit part

James
  ----- Original Message ----- 
  From: Jamie Gagnon 
  To: World War I Modeling Mailing List 
  Sent: Saturday, August 15, 2009 2:43 AM
  Subject: [WWI] Wingnut LVG C VI rigging question


  Hi guys;

  Where exactly do the bracing wires for the undercarriage attach? The fuselage attachment points are clear, but the Wingnut instruction sheet is not clear as to where the other end of each wire goes. I've looked at the other builds online, and noticed that I am not the only one confused about this point. Some people have attached the wire to a yoke around the axle, others have drilled a hole in the forward landing gear strut on each side. Still others have attached the wires to the ends of the rod that goes in front of the axle. I've looked at a lot of photographs and drawings but none seem to resolve this. 

  Jamie
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.wwi-models.org/pipermail/wwi/attachments/20090815/8aca56fe/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Spreader bar.jpg
Type: image/jpeg
Size: 74095 bytes
Desc: not available
URL: <http://www.wwi-models.org/pipermail/wwi/attachments/20090815/8aca56fe/attachment.jpg>