[WWI] Added:Soviet Spad S.VII

[Jim Landon]

<<If you really want to go to town with the in flight views, position the model on a piece of glass ...>> There are as many ways to do it as there are listees - lay it on it's back like Dmitry did, except place it on a photo of the sky with a few clouds. Add another light source(s) to eliminate the shadows. Replace the prop with a disk of clear plastic to make it look like a spinning prop. Or spin the prop with a hair dryer. Hang the model from thread and later erase the thread with photo software. See:
http://www.wwi-models.org/Images/Landon/TMorse/index.html
http://www.wwi-models.org/Images/Landon/Flyer/index.html
http://www.wwi-models.org/Images/Landon/Salmson/index.html
 Jim> Date: Thu, 17 Jan 2008 09:20:56 -0500> To: wwi at wwi-models.org> From: thayers at flyrc.com> Subject: Re: [WWI] Added:Soviet Spad S.VII> > > >The Spad looks very good. I like the idea of laying it on it's back > >to create an "in flight" view.> > Agreed, on both counts. If you really want to go to town with the in > flight views, position the model on a piece of glass and shoot from > below. If you don't want to shoot through up the glass, you can put > the model upside down and shoot down on it. Position a mirror below > it to reflect the sky.> > Thayer> -------> Thayer Syme> Editor, Fly RC Magazine> Maplegate Media> 650 Danbury Rd> Ridgefield, CT 06877> 203-431-7787, ext 119 > > 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.wwi-models.org/pipermail/wwi/attachments/20080117/c77cef74/attachment.html