[WWI] wood finishes

[Dave Calhoun]

 Hi Michael,
I have a slightly different method, I use a base coat of acrylic ivory paint brushed on in a streaky pattern (does not have to cover 100% if the base plastic is white or gray since that will help with the grain.  When the acrylic dries overnight I use artist oil paint, either burnt sienna or burnt umber depending on the color of the wood.  I thin it out with turpentine and use a wide soft brush to spread the oil over the base.  I wipe most of it off with a rag, but it leaves a semi transparent finish and takes a while to dry.  when it starts to dry a stiffer brush can be brushed over it to get some more wood grain effects.  Takes some practice, but if you mess it up a little turpentine will remove most of the oils and not hurt the acrylic base.  A final coat of Future gives it a durable gloss varnished finish.  On Albatros fighters I have tried a coat of Tamiya clear yellow mixed with clear orange to give it a orange varnish finish.
Hope this helps,
Dave
 Hey all,
      As I work with wood for a living, (and am picky as hell by genetics) I have to say I am very impressed with some of the representation of plywood I have seen in a lot of photos on the site.
      In the cases where the formula is given for painting, it seems a pretty similar process has been followed. Does anyone wish to share with me their particular recipes and techniques??
  TIA,
  Michael

  Michael Scarborough - Designer/Craftsman
  www.michaelscarboroughdesign.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.wwi-models.org/pipermail/wwi/attachments/20071223/621f9f1a/attachment.html