[WWI] Airco DH2 Build

Stephen Auslender auslend at snet.net
Mon Apr 30 09:04:21 EDT 2007

What does CDL stand for?
Acronyms save a lot of time but it would be nice if you could use the full 
words at the beginning of the post and then the short versions  afterwards.

----- Original Message ----- 
From: "Paul Carpenter" <carpo5 at iprimus.com.au>
To: <wwi at wwi-models.org>
Sent: Monday, April 30, 2007 5:37 AM
Subject: [WWI] Airco DH2 Build

Hi Groupies,
Thanks for the positive feedback on my model. Sorry for the late reply - I 
have had my messages blocked for some reason.....computers!!!

For Sperry,
The CDL is a base coat of Vallejo "Sand". I pre shade the wing ribs and
spars with dark brown and then apply the CDL colour. Then I wash over the
whole surface with avery thin sepia ink - I use Pelikan Plaka and I am
running out of this ink because it is no longer available here in Australia
The key is to keep the ink from drying with any watermarks - just "keep it
moving" with a moist brush.
Then when all is very dry, I dry brush with white oil paint - very lightly
but enough to lighten the highest points - I apply this more liberally to
the upper surface than the lower.
The roundels on the lower side of the upper wing are done with pastel
chalks, applied as a powder using a brush - hopefully this captures a sort
of see through effect.

I usually drill the holes in the wings for rigging so that all of the
threads go through the bottom wing. This just made me sloppy and I never
filled them in very well. On this model I drilled right through the upper
wing - I had to do a good fill job on them as they would be very visible. It
was also easier to sand back the filler on the upper wing because the
surface is convex.

For Don, the cockpit coaming is moulded with the kit - Eduard do some really
nice work in this regard. The wrinkles in the fabric however are carved or
scraped out of the kit parts using small chisels.

Thanks all again for such flattering comments,
Paul Carpenter

More information about the WWI mailing list