WWI Digest 3553 Topics covered in this issue include: 1) Re: masking tape/again by "Tom Plesha" 2) RE: Krystal Kleer by mflake@tarrantcounty.com (Flake, Marc) 3) RE: Krystal Kleer by "dfernet0" 4) Re: masking tape by "Hans Trauner" 5) Re: masking tape by "Pedro Soares" 6) Re: masking tape by "Brent Theobald" 7) Who Wants A 1:48 Albatros C.XII and Spad 11? by Todd Hayes 8) by gughhhgj@gfgyj 9) RE: Roden Fokker D.VII by Ivan Subrt 10) ot Shining was: RE: Nats Pics by Ivan Subrt 11) Re: Strut & Prop logo decals by "Matt Bittner" 12) Fwd: Wow ! Amazing eBay Item for auction ! by "Steve Lawson" 13) RE: Wow ! Amazing eBay Item for auction ! by "Jay M. Thompson" 14) Re: Who Wants A 1:48 Albatros C.XII and Spad 11? by "Bob Pearson" 15) More 4D by "John & Allison Cyganowski" 16) RE: Roland DVIa by Shane Weier 17) best scale for models by Steve Cox 18) Re: Strut & Prop logo decals by ibs4421@commandnet.net ---------------------------------------------------------------------- Date: Thu, 26 Jul 2001 15:55:47 -0400 From: "Tom Plesha" To: Subject: Re: masking tape/again Message-ID: <003101c1160c$f6f8be80$2cfdfa18@mcmb1.mi.home.com> Michael says: > I use acrylics and have great difficulty finding masking tape that won't > pull off the paint. (snip ) > Is Tamiya so much better than > Testors? If so, why? Any other tips when using masking tape? Hi Michael- FWIW- I only use Tamiya Tape and/or 3M sticky message pads to tape painted surfaces. I have been recently trying Parafilm (notice I've spelled it correctly and not Parrafin) and have not been impressed yet with it, because I'm probably doing something wrong in the application of it. HTH Later Tom S.E.MI. ------------------------------ Date: Thu, 26 Jul 2001 15:02:26 -0500 From: mflake@tarrantcounty.com (Flake, Marc) To: "'wwi@wwi-models.org'" Subject: RE: Krystal Kleer Message-ID: D asked: "Quite strange! I never knew that future had the superficial strenght to hold over a void space (as a bubble). It was just plain future or it was mixed with something else?" This was plain Future straight out of the bottle. Keep in mind I'm talking about 1/72nd scale Camels with a cutout and a brace. The gap on each side of the brace is about 3/16 of an inch. Frankly, I wasn't even trying to do this and did not even notice I had drawn the future across the gaps (On one wing it spanned both gaps on either side of the cutout) until after it had dried. As I said, I'm eager to try to do this on purpose to see what may have happened. Marc Flake ------------------------------ Date: Thu, 26 Jul 2001 17:13:55 -0300 From: "dfernet0" To: Subject: RE: Krystal Kleer Message-ID: <022d01c1160f$7f56ccc0$4640a8c0@ssp.salud.rosario.gov.ar> That's a trick I'll try to remember. thanks, Marc! D. ----- Original Message ----- From: Flake, Marc To: Multiple recipients of list Sent: Thursday, July 26, 2001 5:08 PM Subject: RE: Krystal Kleer > D asked: "Quite strange! I never knew that future had the superficial > strenght to hold > over a void space (as a bubble). It was just plain future or it was mixed > with something else?" > > This was plain Future straight out of the bottle. Keep in mind I'm talking > about 1/72nd scale Camels with a cutout and a brace. The gap on each side > of the brace is about 3/16 of an inch. Frankly, I wasn't even trying to do > this and did not even notice I had drawn the future across the gaps (On one > wing it spanned both gaps on either side of the cutout) until after it had > dried. As I said, I'm eager to try to do this on purpose to see what may > have happened. > > Marc Flake > ------------------------------ Date: Thu, 26 Jul 2001 22:17:53 +0200 From: "Hans Trauner" To: Subject: Re: masking tape Message-ID: <002f01c11610$0fd21ac0$75ab72d4@FRITZweb> Michael, same problem with me. After I have changed from enamels ( for which Scotch is great) I run in similiar problems. Not only Scotch tends to remove the paint, in other cases the glue remained with no way to remove it. Only with isopropanol... I'll tried any masking tape available here plus all those films for airbrush work - nothing worked. Then I dicovered Tamiya tape which I had avoided due to high prices. It's works real fine with Tamiya acrylics and Gunze and Pactra. Never tried it with other sort of paints, but I think if they are futured it will work with any paint. Tamiya tape is flexible also, and I have always two different sizes ready to hand. It can be cut also very easily if fixed on a piece of glass, cut with steel ruler and new blade. After removal it can be used as taken from the roll. H. ----- Original Message ----- From: "Michael Kendix" To: "Multiple recipients of list" Sent: Thursday, July 26, 2001 7:15 PM Subject: masking tape > Since things appear a little moribund on the list, I thought I'd ask a > fundamental type of question. > > I use acrylics and have great difficulty finding masking tape that won't > pull off the paint. I've tried Scotch Tape, which usually works OK but is > not very flexible. Also, Testors masking tape, which pulls off things with > irritating regularity and allows a fair amount of bleeding. I tried > de-stickying the tape by sticking it to my forehead before applying it. Any > recommendations for particular tape brands? Is Tamiya so much better than > Testors? If so, why? Any other tips when using masking tape? > > Thanks, > > Michael > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp ------------------------------ Date: Thu, 26 Jul 2001 21:36:09 +0100 From: "Pedro Soares" To: Subject: Re: masking tape Message-ID: <005401c11612$9aee1080$4b090dd5@pc1> > Michael, Not only Scotch tends to remove the > paint, Try the single malt variety.... much softer.... :-) Pedro ------------------------------ Date: Thu, 26 Jul 2001 20:57:46 +0000 From: "Brent Theobald" To: wwi@wwi-models.org Subject: Re: masking tape Message-ID:

Howdy!

I forgot to mention that I use 3M blue pin striping tape. It is very flexible (I can mask a 3/8" circle) and it hasn't damaged any of my models yet. It is found at automotive paint stores. I pick some up whenever I'm out of 2000+ grit sandpaper.

Later!

Brent



Get your FREE download of MSN Explorer at http://explorer.msn.com
------------------------------ Date: Thu, 26 Jul 2001 14:47:28 -0700 (PDT) From: Todd Hayes To: wwi@wwi-models.org Subject: Who Wants A 1:48 Albatros C.XII and Spad 11? Message-ID: <20010726214728.15367.qmail@web11107.mail.yahoo.com> I do. Tom's Modelworks is working on these kits, but I think he keeps putting them off to work on his ship details. I signed his guest register and in the remarks section requested that he finish his TBA kits. Maybe if list members press him a little, he'll get then out finally. tomsmodelworks.com Todd __________________________________________________ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ ------------------------------ Date: Thu, 26 Jul 2001 17:50:05 -0400 (EDT) From: gughhhgj@gfgyj To: HK Message-ID: <200107262150.RAA08066@mustang.sr.unh.edu> YIU KEE AIR-CONDION & ELETRICAL Government Permitted Repair Company Applying WR2 & Air refreshment license for you TEL: 26633167-21370048-25688167 Professional engineer sincerely to solve any air-conditions, refrigerate related and also water pie, electrical problem. One year guarantee for all repaired machines. Many cheap and good second-handed Air-Conditioner and refrigerator for sale. Water pie Electrical Aluminum window Maintenance Sewer congestion Cement Painting Engineering PRICE FOR WINDOW AIR-CONDITION: MODEL CHECK AND CLEAN REFRESHMENT ADDING OIL 耀記冷氣水電工程 YIU KEE AIR-CONDITION & ELECTRICAL TEL: 25688167 -21370048-26633167 ﹝政府合格電器承造商﹞ 代客申請WR2及通風牌 本公司承接港九 新界大小屋村寫字樓商鋪住宅之裝修翻新及水電冷氣工程[價廉物美]免費上門報價. 歡迎致電問詢 水喉電燈-渠廁潔具 水泵環保-防水防漏 油漆批灰-泥水批盪 間房造櫃-天花地板 簷篷花架-鋁質燒焊 保養工程-清拆工程 本公司忠誠客戶解決1匹之300匹冷氣機,凍肉櫃及雪櫃及其它水喉電燈等一切問題,凡經維修,保用一年.專業技師檢查,買賣二手冷氣機,櫃機及分體機,價格特平 如需取消請電77738167講低FAX NO THANK YOU ------------------------------ Date: Thu, 26 Jul 2001 23:18:37 +0200 From: Ivan Subrt To: "'wwi@wwi-models.org'" Subject: RE: Roden Fokker D.VII Message-ID: <01C1162E.06D1BD40@a116-158.dialup.iol.cz> Matt, when I connect the ends of top wing with a ruler, there is about 0.5 mm space left in the centre of the top surface (with maximum at the left side of wing cutout). Otherwise, when laying the top wing on the flat area, there are about 2.5 mm beneath both ends of the wing. I think that's warping only. And both Early and F kits now available look great to me. Cheers! Ivan Subrt http://www.czechia.com/silverbird "The air is our sea." Czech proverb ---------- Od: Bittner, Matthew E. (KTR)~U[SMTP:BITTNERM@stratcom.mil] Odesl嫕o: 24. 鋀rvence 2001 16:15 Komu: Multiple recipients of list P鷫dm鮅: RE: Roden Fokker D.VII > -----Original Message----- > From: dfernet0 [mailto:dfernet0@rosario.gov.ar] > Sent: Tuesday, July 24, 2001 9:11 AM > You mean that the thickness of the Roden upper wing is the > same in all the > span? > ohhhhh Yea, that's it. Instead of doing flat on top with "dihedral" underneath, it's dihedral on the whole wing. Matt Bittner ------------------------------ Date: Fri, 27 Jul 2001 00:05:42 +0200 From: Ivan Subrt To: "'wwi@wwi-models.org'" Subject: ot Shining was: RE: Nats Pics Message-ID: <01C1162F.E5E8D580@a116-158.dialup.iol.cz> Having read the English original only I can't imagine how the Czech translator would cope with this equivoke without making it instantly obvious as there's no meaning for the word AD唧RV in our language :) Cheers! Ivan Subrt http://www.czechia.com/silverbird "The air is our sea." Czech proverb ---------- Od: Bittner, Matthew E. (KTR)~U[SMTP:BITTNERM@stratcom.mil] Odesl嫕o: 20. 鋀rvence 2001 15:53 Komu: Multiple recipients of list P鷫dm鮅: RE: Nats Pics Oh yea? Well I have only one word for you, chum: "REDRUM"!!! :-) Matt Bittner begin 600 WINMAIL.DAT M>)\^(C06`0:0" `$```````!``$``0>0!@`(````X@0```````#F``$(@ <` M& ```$E032Y-:6-R;W-O9G0@36%I;"Y.;W1E`#$(`0V ! `"`````@`"``$$ MD 8`% $```$````,`````P``, (````+``\.``````(!_P\!````0P`````` M``"!*Q^DOJ,0&9UN`-T!#U0"`````'=W:4!W=VDM;6]D96QS+F]R9P!33510 M`'=W:4!W=VDM;6]D96QS+F]R9P``'@`", $````%````4TU44 `````>``,P M`0```!,```!W=VE =W=I+6UO9&5L M``$P`0```!4````G=W=I0'=W:2UM;V1E;',N;W)G)P`````"`0LP`0```!@` M``!33510.E=724!75TDM34]$14Q3+D]21P`#```Y``````L`0#H!`````@'V M#P$````$`````````F8Q`02 `0`>````;W0@4VAI;FEN9R!W87,Z(%)%.B!. M871S(%!I8W,`S@D!!8 #``X```#1!P<`&P````4`*@`%`"X!`2" `P`.```` MT0<'`!H`%@`?`# `! !B`0$)@ $`(0```$8Y149"-4(T,#0X,D0U,3$X03,Y M-T-&03$Q0S$T.3 X`#$'`0.0!@#8! ``$P````L`(P```````P`F```````+ M`"D```````,`+@```````P`V``````! `#D`X*:E'!\6P0$>`' ``0```!X` M``!O="!3:&EN:6YG('=AF5C:&EA+F-O;0```P`&$'9?QMX# M``<0MP$``!X`"! !````90```$A!5DE.1U)%04142$5%3D=,25-(3U))1TE. M04Q/3DQ924-!3E1)34%'24Y%2$]75$A%0UI%0TA44D%.4TQ!5$]25T]53$1# M3U!%5TE42%1(25-%455)5D]+15=)5$A/551-04L``````@$)$ $```!/`P`` M2P,``',&``!,6D9UA_V!<_\`"@$/`A4"J 7K`H,`4 5T"0(`8V@*P'-E=#+U M```J`N%A!X &``;#`H!L3502IP'Q,@+C$7@S1#@@!Q,@0T4"@S._`\44>A(8 M!Q,"@!5+-!8OBQ<_&$TU&4=P*(:&5L`R!$ M;&<"@W8W'&L>AGT*@ C/"=D[\27O,C4U`H *@0VQ"V# ;F@60*_!TFT#$%U. M?T^/!Y ET"?T93$UT#I6/E&;`=!3@,M8(3B PB(6WP.U M.WU(E5+R?U)69T]H7A011]\%P"41``%T( `#`! 0```` M``,`$1 `````0 `',.#LVOX1%L$!0 `(,.#LVOX1%L$!'@`]``$````!```` &`````-UG ` end ------------------------------ Date: Thu, 26 Jul 2001 17:06:50 -0500 From: "Matt Bittner" To: "wwi@wwi-models.org" Subject: Re: Strut & Prop logo decals Message-ID: <200107262207.PAA16004@gull.mail.pas.earthlink.net> Count me in for two sheets in 1/72nd!! Matt Bittner ------------------------------ Date: Thu, 26 Jul 2001 18:20:09 -0400 From: "Steve Lawson" To: , , , Subject: Fwd: Wow ! Amazing eBay Item for auction ! Message-ID: <01Jul26.182955edt.119124@gatekeeper.bop.gov> This is a MIME message. If you are reading this text, you may want to consider changing to a mail reader or gateway that understands how to properly handle MIME multipart messages. --=_673D31CC.97F6C173 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Content-Disposition: inline People will buy anything. STL --=_673D31CC.97F6C173 Content-Type: message/rfc822 Received: from ivscan.bop.gov by gwmail.bop.gov; Tue, 24 Jul 2001 10:50:42 -0400 Received: from smtp-out.netins.net ([167.142.225.20]) by gatekeeper.bop.gov with ESMTP id <119102>; Tue, 24 Jul 2001 10:54:38 -0400 Received: from ctx (stch-01-59.dialup.netins.net [209.152.84.188]) by smtp-out.netins.net (8.9.3/8.9.3) with SMTP id JAA31253; Tue, 24 Jul 2001 09:50:16 -0500 (CDT) Message-ID: <000d01c11450$2a917700$bc5498d1@ctx> Reply-To: "Gregory H VanWyngarden" From: "Gregory H VanWyngarden" To: "Steve Lawson" , "Jack Herris" , "Jim Streckfuss" , "Aaron Weaver" , "Rick Duiven" , "Colin Owers" Subject: Wow ! Amazing eBay Item for auction ! Date: Tue, 24 Jul 2001 09:51:40 -0500 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="------------InterScan_NT_MIME_Boundary" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.5 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 This is a multi-part message in MIME format. --------------InterScan_NT_MIME_Boundary Content-Type: multipart/alternative; boundary="----=_NextPart_000_000A_01C11426.3D0D9E60" ------=_NextPart_000_000A_01C11426.3D0D9E60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi Guys, Hey, if you get a chance, check out eBay item # 1169286286 - you can be = the first on your block to own an actual strand of the Red Baron's hair = ! No kidding ! Just think of the possibilities - we could have his DNA = analyzed - maybe even clone him ! Geeze ! There's a lot of loonies out there... Greg ------=_NextPart_000_000A_01C11426.3D0D9E60 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi Guys,
 
Hey, if you get a chance, check out = eBay item #=20 1169286286 - you can be the first on your block to own an actual strand = of the=20 Red Baron's hair ! No kidding ! Just think of = the=20 possibilities - we could have his DNA analyzed - maybe even clone him=20 !
 
Geeze ! There's a  lot of = loonies out=20 there...
 
Greg
------=_NextPart_000_000A_01C11426.3D0D9E60-- --------------InterScan_NT_MIME_Boundary-- --=_673D31CC.97F6C173-- ------------------------------ Date: Thu, 26 Jul 2001 17:43:29 -0500 From: "Jay M. Thompson" To: wwi@wwi-models.org Subject: RE: Wow ! Amazing eBay Item for auction ! Message-ID: I've forgotten who it was that told me this, but the statement was to the effect that if every lock of hair attributed to MvR were real, he would have been a Yeti. -----Original Message----- From: wwi@wwi-models.org [mailto:wwi@wwi-models.org]On Behalf Of Steve Lawson Sent: Thursday, July 26, 2001 5:27 PM To: Multiple recipients of list Subject: Fwd: Wow ! Amazing eBay Item for auction ! This is a MIME message. If you are reading this text, you may want to consider changing to a mail reader or gateway that understands how to properly handle MIME multipart messages. --=_673D31CC.97F6C173 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: quoted-printable Content-Disposition: inline People will buy anything. STL --=_673D31CC.97F6C173 Content-Type: message/rfc822 Received: from ivscan.bop.gov by gwmail.bop.gov; Tue, 24 Jul 2001 10:50:42 -0400 Received: from smtp-out.netins.net ([167.142.225.20]) by gatekeeper.bop.gov with ESMTP id <119102>; Tue, 24 Jul 2001 10:54:38 -0400 Received: from ctx (stch-01-59.dialup.netins.net [209.152.84.188]) by smtp-out.netins.net (8.9.3/8.9.3) with SMTP id JAA31253; Tue, 24 Jul 2001 09:50:16 -0500 (CDT) Message-ID: <000d01c11450$2a917700$bc5498d1@ctx> Reply-To: "Gregory H VanWyngarden" From: "Gregory H VanWyngarden" To: "Steve Lawson" , "Jack Herris" , "Jim Streckfuss" , "Aaron Weaver" , "Rick Duiven" , "Colin Owers" Subject: Wow ! Amazing eBay Item for auction ! Date: Tue, 24 Jul 2001 09:51:40 -0500 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="------------InterScan_NT_MIME_Boundary" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 4.72.3110.5 X-MimeOLE: Produced By Microsoft MimeOLE V4.72.3110.3 This is a multi-part message in MIME format. --------------InterScan_NT_MIME_Boundary Content-Type: multipart/alternative; boundary="----=_NextPart_000_000A_01C11426.3D0D9E60" ------=_NextPart_000_000A_01C11426.3D0D9E60 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Hi Guys, Hey, if you get a chance, check out eBay item # 1169286286 - you can be = the first on your block to own an actual strand of the Red Baron's hair = ! No kidding ! Just think of the possibilities - we could have his DNA = analyzed - maybe even clone him ! Geeze ! There's a lot of loonies out there... Greg ------=_NextPart_000_000A_01C11426.3D0D9E60 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Hi Guys,
 
Hey, if you get a chance, check out = eBay item #=20 1169286286 - you can be the first on your block to own an actual strand = of the=20 Red Baron's hair ! No kidding ! Just think of = the=20 possibilities - we could have his DNA analyzed - maybe even clone him=20 !
 
Geeze ! There's a  lot of = loonies out=20 there...
 
Greg
------=_NextPart_000_000A_01C11426.3D0D9E60-- --------------InterScan_NT_MIME_Boundary-- --=_673D31CC.97F6C173-- ------------------------------ Date: Thu, 26 Jul 2001 15:50:15 -0700 From: "Bob Pearson" To: wwi@wwi-models.org Subject: Re: Who Wants A 1:48 Albatros C.XII and Spad 11? Message-ID: <3B5F15F200058A61@mail.san.yahoo.com> (added by postmaster@mail.san.yahoo.com) The C.XII is basically done (last I heard - I'm doing the decals for it) .. I'm just waiting for a test shot of the fuselage to match one of the decals to it. His ship kits have been passed on to other companies and he is devoting himself to PE and his WW1 aircraft. Bob ---------- >From: Todd Hayes >To: Multiple recipients of list >Subject: Who Wants A 1:48 Albatros C.XII and Spad 11? >Date: Thu, Jul 26, 2001, 2:50 pm > > I do. Tom's Modelworks is working on these kits, but > I think he keeps putting them off to work on his ship > details. I signed his guest register and in the > remarks section requested that he finish his TBA kits. > Maybe if list members press him a little, he'll get > then out finally. tomsmodelworks.com > > Todd > > > __________________________________________________ > Do You Yahoo!? > Make international calls for as low as $.04/minute with Yahoo! Messenger > http://phonecard.yahoo.com/ > ------------------------------ Date: Thu, 26 Jul 2001 18:54:44 -0400 From: "John & Allison Cyganowski" To: Subject: More 4D Message-ID: <015c01c11625$f7428f60$ea38183f@cyrixp166> This is the photo from the Miller book. "History of the First Day Bombarment Group", Thomas Miller, WWI Aero Publishers, Vol. 1., No2 (the bookshop not the magazine). http://pigstompers.com/WW1/Germans/Pilots/JPGS/Bea-mar_02.jpg The photo in the book is more clear, and you can see Berthold's marking underneath v B-M's marking. Regards, John Cyg ------------------------------ Date: Fri, 27 Jul 2001 09:07:18 +1000 From: Shane Weier To: "'wwi@wwi-models.org'" Subject: RE: Roland DVIa Message-ID: <7186131CB805D411A60E0090272F7C7102BCD337@mimhexch1.mim.com.au> Rob > >A very nice MAC Roland DVIa is on Hyperscale today. IIRC > >this is the guy > >who did the 1/72 vac BE2 that many of you saw at the nats, > >the one with > >CDL, and very convincing 'shadow' effects. > > Thanks for the compliment Merrill but unfortunately the BE2 > and I have not crossed paths ......................yet. Phew. For a moment there I thought that you'd gone all the way from Perth to Chicago and yet wouldn't show your models in Brisbane. Nice model though - and quick, too. > Hopefully this will won't be my only foray to the *other* side. Shane (on the other other side ;-) ********************************************************************** The information contained in this e-mail is confidential and is intended only for the use of the addressee(s). If you receive this e-mail in error, any use, distribution or copying of this e-mail is not permitted. You are requested to forward unwanted e-mail and address any problems to the MIM Holdings Limited Support Centre. e-mail: supportcentre@mim.com.au phone: Australia 1800500646 International ++61 7 38338042 ********************************************************************** ------------------------------ Date: Fri, 27 Jul 2001 00:08:03 +0100 From: Steve Cox To: WW1 Mail List Subject: best scale for models Message-ID: At the weekend I saw some OT and ot models at a local show in 1/384th scale. there's a couple of pictures on my website if you're interested, 1/384th Scale on the WW1 models pages. Regards Steve =========================================== steve@oldglebe.freeserve.co.uk http://www.oldglebe.freeserve.co.uk/steveshome.html If I didn't spend so much time on line I'd get some models finished ================ ------------------------------ Date: Thu, 26 Jul 2001 18:13:22 -0500 From: ibs4421@commandnet.net To: Subject: Re: Strut & Prop logo decals Message-ID: <00c001c11628$92009860$783dfad1@esther> Count me in for several sheets in 1/72nd! (You can put me down for several in 1/48th as well, just don't tell my sensei, Matt, OK?) Warren ----- Original Message ----- From: To: "Multiple recipients of list" Sent: Thursday, July 26, 2001 2:35 PM Subject: Strut & Prop logo decals > > --part1_e.102b1c11.2891ca37_boundary > Content-Type: multipart/alternative; > boundary="part1_e.102b1c11.2891ca37_alt_boundary" > > > --part1_e.102b1c11.2891ca37_alt_boundary > Content-Type: text/plain; charset="US-ASCII" > Content-Transfer-Encoding: 7bit > > If you were at the Nats you may have seen the Pacific Aero Press stall and > some of the great decals they had of WW Second strut and prop decals. I have > asked the owner, Chuck Banks, at pacificaeropress@juno.com if he's > considering doing WW I strut & prop markings in 1:48 (or I guess even in > 1:72). He says they would need to sell 1000 sheets to make it worthwhile, > and he asked if there were that many of us out there who would be interested. > Well, what do you all think? Is there the market? > > Tom Morgan > > > > > > > > > > --part1_e.102b1c11.2891ca37_alt_boundary > Content-Type: text/html; charset="US-ASCII" > Content-Transfer-Encoding: 7bit > > If you were at the Nats you may have seen the Pacific Aero Press stall and >
some of the great decals they had of WW Second strut and prop decals.  I have >
asked the owner, Chuck Banks, at     pacificaeropress@juno.com     if he's >
considering doing WW I strut & prop markings in 1:48 (or I guess even in >
1:72).  He says they would need to sell 1000 sheets to make it worthwhile, >
and he asked if there were that many of us out there who would be interested. >
Well, what do you all think?  Is there the market?
>
>
Tom Morgan >
>
>
>
>
>
> > --part1_e.102b1c11.2891ca37_alt_boundary-- > > --part1_e.102b1c11.2891ca37_boundary > Content-Type: message/rfc822 > Content-Disposition: inline > > Return-path: > From: Morg17ms@aol.com > Full-name: Morg17ms > Message-ID: > Date: Wed, 25 Jul 2001 22:49:22 EDT > Subject: Strut & Prop logo decals > To: wwi@wwi-models.org > MIME-Version: 1.0 > Content-Type: multipart/mixed; boundary="part2_e.102b1c11.2890df32_boundary" > X-Mailer: AOL 6.0 for Windows CA sub 12005 > > > --part2_e.102b1c11.2890df32_boundary > Content-Type: multipart/alternative; > boundary="part2_e.102b1c11.2890df32_alt_boundary" > > > --part2_e.102b1c11.2890df32_alt_boundary > Content-Type: text/plain; charset="US-ASCII" > Content-Transfer-Encoding: 7bit > > If you were at the Nats you may have seen the Pacific Aero Press stall and > some of the great decals they had of WW Second strut and prop decals. I have > asked the owner, Chuck Banks, at pacificaeropress@juno.com if he's > considering doing WW I strut & prop markings in 1:48 (or I guess even in > 1:72). He says they would need to sell 1000 sheets to make it worthwhile, > and he asked if there were that many of us out there who would be interested. > Well, what do you all think? Is there the market? > > Tom Morgan > > > > > > > > > --part2_e.102b1c11.2890df32_alt_boundary > Content-Type: text/html; charset="US-ASCII" > Content-Transfer-Encoding: 7bit > > If you were at the Nats you may have seen the Pacific Aero Press stall and >
some of the great decals they had of WW Second strut and prop decals.  I have >
asked the owner, Chuck Banks, at     pacificaeropress@juno.com     if he's >
considering doing WW I strut & prop markings in 1:48 (or I guess even in >
1:72).  He says they would need to sell 1000 sheets to make it worthwhile, >
and he asked if there were that many of us out there who would be interested. >
Well, what do you all think?  Is there the market?
>
>
Tom Morgan
>
>
>
>
>
> > --part2_e.102b1c11.2890df32_alt_boundary-- > > --part2_e.102b1c11.2890df32_boundary > Content-Type: message/rfc822 > Content-Disposition: inline > > Return-Path: <> > Received: from rly-yd05.mx.aol.com (rly-yd05.mail.aol.com [172.18.150.5]) by air-yd01.mail.aol.com (v79.27) with ESMTP id MAILINYD16-0725224220; Wed, 25 Jul 2001 22:42:20 -0400 > Received: from mustang.sr.unh.edu (mustang.sr.unh.edu [132.177.241.68]) by rly-yd05.mx.aol.com (v79.20) with ESMTP id MAILRELAYINYD56-0725224146; Wed, 25 Jul 2001 22:41:46 -0400 > Received: from localhost (localhost) > by mustang.sr.unh.edu (SGI-8.9.3/8.9.3) with internal id WAA02907; > Wed, 25 Jul 2001 22:43:18 -0400 (EDT) > Date: Wed, 25 Jul 2001 22:43:18 -0400 (EDT) > From: Mail Delivery Subsystem > Message-Id: <200107260243.WAA02907@mustang.sr.unh.edu> > To: > MIME-Version: 1.0 > Content-Type: multipart/report; report-type=delivery-status; > boundary="WAA02907.996115398/mustang.sr.unh.edu" > Subject: Returned mail: unknown mailer error 1 > Auto-Submitted: auto-generated (failure) > X-Mailer: Unknown (No Version) > > > --WAA02907.996115398/mustang.sr.unh.edu > > The original message was received at Wed, 25 Jul 2001 22:43:18 -0400 (EDT) > from mail.san.yahoo.com [209.132.1.30] > > ----- The following addresses had permanent fatal errors ----- > "|/usr/local/lib/listproc/catmail -L WWI -f" > (expanded from: ) > > ----- Transcript of session follows ----- > 554 "|/usr/local/lib/listproc/catmail -L WWI -f"... unknown mailer error 1 > > --WAA02907.996115398/mustang.sr.unh.edu > Reporting-MTA: dns; mustang.sr.unh.edu > Received-From-MTA: DNS; mail.san.yahoo.com > Arrival-Date: Wed, 25 Jul 2001 22:43:18 -0400 (EDT) > > Original-Recipient: rfc822;wwi@wwi-models.org > Final-Recipient: RFC822; > X-Actual-Recipient: RFC822; |/usr/local/lib/listproc/catmail -L WWI -f@mustang.sr.unh.edu > Action: failed > Status: 5.0.0 > Last-Attempt-Date: Wed, 25 Jul 2001 22:43:18 -0400 (EDT) > > --WAA02907.996115398/mustang.sr.unh.edu > Content-Type: message/rfc822 > > Return-Path: > Received: from mail.san.yahoo.com (mail.san.yahoo.com [209.132.1.30]) > by mustang.sr.unh.edu (SGI-8.9.3/8.9.3) with ESMTP id WAA02903 > for ; Wed, 25 Jul 2001 22:43:18 -0400 (EDT) > From: Morg17ms@aol.com > Received: from imo-r08.mx.aol.com (152.163.225.104) by mail.san.yahoo.com (5.5.039.2) > id 3B5F17280000EFE2 for wwi@mustang.sr.unh.edu; Wed, 25 Jul 2001 19:40:25 -0700 > Received: from Morg17ms@aol.com > by imo-r08.mx.aol.com (mail_out_v31.9.) id 3.c1.1168a636 (17230) > for ; Wed, 25 Jul 2001 22:41:07 -0400 (EDT) > Message-ID: > Date: Wed, 25 Jul 2001 22:41:06 EDT > Subject: Strut & Prop markings decals > To: wwi@wwi-models.org > MIME-Version: 1.0 > Content-Type: multipart/alternative; boundary="part1_c1.1168a636.2890dd42_boundary" > X-Mailer: AOL 6.0 for Windows CA sub 12005 > > > > --part1_c1.1168a636.2890dd42_boundary > Content-Type: text/plain; charset="US-ASCII" > Content-Transfer-Encoding: 7bit > > If you were at the Nats you may have seen the Pacific Aero Press stall and > some of the great decals they had of WW Second strut and prop decals. I have > asked the owner, Chuck Banks, at pacificaeropress@juno.com if he's > considering doing WW I strut & prop markings in 1:48 (or I guess even in > 1:72). He says they would need to sell 1000 sheets to make it worthwhile, > and he asked if there were that many of us out there who would be interested. > Well, what do you all think? Is there the market? > > Tom Morgan > > --part1_c1.1168a636.2890dd42_boundary > Content-Type: text/html; charset="US-ASCII" > Content-Transfer-Encoding: 7bit > > If you were at the Nats you may have seen the Pacific Aero Press stall and >
some of the great decals they had of WW Second strut and prop decals.  I have >
asked the owner, Chuck Banks, at     pacificaeropress@juno.com     if he's >
considering doing WW I strut & prop markings in 1:48 (or I guess even in >
1:72).  He says they would need to sell 1000 sheets to make it worthwhile, >
and he asked if there were that many of us out there who would be interested. >
Well, what do you all think?  Is there the market? >
>
Tom Morgan
> > --part1_c1.1168a636.2890dd42_boundary-- > > --WAA02907.996115398/mustang.sr.unh.edu-- > > --part2_e.102b1c11.2890df32_boundary-- > > --part1_e.102b1c11.2891ca37_boundary-- > ------------------------------ End of WWI Digest 3553 **********************