WWI Digest 2442 Topics covered in this issue include: 1) Re: Fokker cowling Swirls by Albatrosdv@aol.com 2) Albatros cook up: the busy cockpit by "dfernet0" 3) Modeling anniversary - was part I hate the most by Mark Vaughan-Jackson 4) Re: The part I hate the most... by Mark Vaughan-Jackson 5) Re: Rudders by "Carol & David Solosy" 6) Re: IPMS - Dallas by Brent_A_Theobald@seagate.com 7) Re: IPMS - Dallas by "Matt Bittner" 8) New images by "Matt Bittner" 9) Re: Taube - Dove of War by Brian.Nicklas@nasm1.si.edu 10) Air Compressors by Brian.Nicklas@nasm1.si.edu 11) Newbie Bio by "Graham Hunter" 12) Re: Newbie Bio by "Bill Bacon" 13) Re: IPMS - Dallas by "Mark Shannon" 14) Re: Newbie Bio by "Brad & Merville" 15) Contour Gauge [?] by Sean Bayan Schoonmaker 16) RE: Contour Gauge [?] by "dfernet0" 17) Re: Contour Gauge [?] by Brian.Nicklas@nasm1.si.edu 18) VB: Hello world by "Neil Crawford" 19) Re: Fokker cowling Swirls by Matthew Zivich 20) Re: VB: Hello world by "Matt Bittner" 21) RE: Contour Gauge [?] by Sean Bayan Schoonmaker 22) Re: Contour Gauge [?] by MAnde72343@aol.com 23) Re: Contour Gauge [?] by Mark Vaughan-Jackson 24) Charles Gosse Collection was ( Re: Albatros cook up: the busy cockpit by "cameron rile" 25) RE: Charles Gosse Collection was ( Re: Albatros cook up: the busy cockpit by "dfernet0" 26) Re: Albatros cook up: the busy cockpit by "Lance Krieg" 27) Re: Rigging: To Wire or Thread? by Steve Cox 28) Re: Taube - Dove of War by Steve Cox 29) Re: IPMS Nationals in Dallas by "Bill Bacon" 30) A small ot indulgence, if you please by " Todd Henry" 31) Re: Newbie Bio by David Fleming 32) Re: A small ot indulgence, if you please by "Brad & Merville" 33) Re: Bristol M1.c by Steve Cox ---------------------------------------------------------------------- Date: Fri, 30 Jun 2000 01:33:47 EDT From: Albatrosdv@aol.com To: wwi@pease1.sr.unh.edu Subject: Re: Fokker cowling Swirls Message-ID: In a message dated 6/29/00 9:30:33 PM EST, MAnde72343@aol.com writes: << Jon. that dremel rubber polishing bit will polish tool steel- it's way too abrasive for hobby work, I've used it to polish loading ramps on guns. Merrill >> Jon: Look at my earlier reply to this thread - you want to do it manually. You have the right idea but you are far too technological (I know, I know, a Marine wants the heavy artillery to knock down the building into rubble before he assaults it...) Tom ------------------------------ Date: Fri, 30 Jun 2000 07:49:10 -0300 From: "dfernet0" To: "WW1 modeling Mail List" Subject: Albatros cook up: the busy cockpit Message-ID: <005f01bfe280$d2df3d00$4640a8c0@ssp.salud.rosario.gov.ar> Hi friends Not so long ago, I was musing with a friend about the contents of the Albatros cockpit, and I asked if she knew if the Albatros fighters carried altimeters of some sort. We concluded that the pilot must have carried it on him, or it would be removable from the cockpit. This feeling on incompleteness is killing me. I can't decide to close my fuselage without having at least a clue id the Albatros had altimeters, turn/bank indicators/clock into their bussiness office or not. Can someone enlighten me on this? Besides, do anyone remembers the URL of Charles Gosse web pages with the german instrument pictures? Thanks in advance D. suffering from AMS too ------------------------------ Date: Fri, 30 Jun 2000 09:26:09 -0400 From: Mark Vaughan-Jackson To: wwi@pease1.sr.unh.edu Subject: Modeling anniversary - was part I hate the most Message-ID: Thanks Brent, I knew there was a loophole in the anniversary list. So small machinery this year (yes, the compresor will be mine) and vac next year. Forget the shop vac, let's talk my own vac forming machine. . .actually a friend of mine - makes models for a living at the university, lucky dog - has made his own. You should see the parts he can turn out. drool. Still in a modeling funk. Listlessly staring at the disembodied DVa and picking through the stacks seeking inspiration. MVJ - in a cold wet pre-Canada Day weekend funk. ------------------------------ Date: Fri, 30 Jun 2000 09:29:07 -0400 From: Mark Vaughan-Jackson To: wwi@pease1.sr.unh.edu Subject: Re: The part I hate the most... Message-ID: Bob wrote: a year? that's nothing .. I have four 1/48 S*******s waiting for the >airbrush for 7-8 years now. ... . Thanks Bob, I feel much better now. At least I did until I discovered a very squashed Airfix Sopwith Pup. It wasn't very good but it was one of the first kits I finished after my return to modeling back in 1992. Found it under a stack of boxes. It was very moving. Just like a fossil, very delicate, and very very flat. A moment of silence please. MVJ ------------------------------ Date: Fri, 30 Jun 2000 20:42:09 +0800 From: "Carol & David Solosy" To: "WW1 list" Subject: Re: Rudders Message-ID: Andrew Thanks for the offer to look for the stuff on the American producer of 1:1 rudders. Yes please, do let me (and the list) know what you find. I'm most curious. Regards David S ------------------------------ Date: Fri, 30 Jun 2000 08:09:47 -0500 From: Brent_A_Theobald@seagate.com To: wwi@pease1.sr.unh.edu Subject: Re: IPMS - Dallas Message-ID: Howdy! What day do ya'll want to get together? I am free all week. Plus I may drag along a few WWI enthusiasts from Minnesota who are not currently list members. Later! Brent ------------------------------ Date: Fri, 30 Jun 2000 08:19:28 -0500 From: "Matt Bittner" To: "wwi@pease1.sr.unh.edu" Subject: Re: IPMS - Dallas Message-ID: <200006301319.GAA13824@magpie.a001.sprintmail.com> On Fri, 30 Jun 2000 09:17:08 -0400 (EDT), Brent_A_Theobald@seagate.com wrote: > What day do ya'll want to get together? I am free all week. Plus I may drag > along a few WWI enthusiasts from Minnesota who are not currently list > members. Just as an FYI, one of those people Brent's talking about is modeling "god", Steve Hustad. :-) Matt Bittner ------------------------------ Date: Fri, 30 Jun 2000 08:29:16 -0500 From: "Matt Bittner" To: "wwi@pease1.sr.unh.edu" Subject: New images Message-ID: <200006301329.GAA25725@raven.a001.sprintmail.com> I just uploaded a bunch of new images from Mike Muth. There are some images without captions; however, he is going to send some so be patient. Well done Mike!! Matt Bittner WW1 Modeling Site Assistant Editor :-) ------------------------------ Date: Fri, 30 Jun 2000 09:46:51 -0400 From: Brian.Nicklas@nasm1.si.edu To: wwi@pease1.sr.unh.edu, thegreatlandoni@hotmail.com Subject: Re: Taube - Dove of War Message-ID: There is no way that book is worth near 100 dollars. If you are a die-hard fan of eartly German/European aviation, you should get a copy. But if you only need it for model building, the best thing in it are the plans, which can be photocopied. The pics for the most part are run too small to extract many details. You'd be better off waiting for a Windsock Datafile. Go to your local library and do an Inter-Library Loan request for the book, that is how I first saw a copy. The 1978 Paul Matt drawings are from Historic Aviation Album, so that is another way to see them. (Sorry, don't know the volume they appeared in, but many 'Golden Age' flying modellers have this series). And the Jan 2000 issue of Windsock had a great piece by Harry Woodman reviewing the Flasback kit, with a single page reproducing the 1913 Rozendaal drawing. Bottom line, save your 93 dollars, buy more kits... ------------------------------ Date: Fri, 30 Jun 2000 09:51:16 -0400 From: Brian.Nicklas@nasm1.si.edu To: wwi@pease1.sr.unh.edu Subject: Air Compressors Message-ID: Hmmm. have a wedding anniversary coming up. Do you think an air compressor is too much to ask for seven years of marital bliss ;-) MVJ No, not at all, I think Air Compressors are a traditional 7 year gift, aren't airbrushes the 5 year? Now if it was six, I think that's supposed to be Dremels... Brian ------------------------------ Date: Fri, 30 Jun 2000 11:43:06 -0500 From: "Graham Hunter" To: Subject: Newbie Bio Message-ID: <000301bfe2b2$44f7a680$fa0101c0@grahamh> Yes, I just subscribed at the beginning of the week. Just a bit about myself... 37, married, two kids. I started model building when I was 8 (a Ford Torino Funny Car). I worked with cars for a few years then got into the mass production of jets, ships and men (army build-up against a couple of school friends). Started serious building in my mid teen years, anything from cars to SF space. Then did a stint with armour. I didn't do any building for a few years and then in late '97 I found a kit of my very first car ('67 Dodge Coronet) so I got back into the swing. Since Dec.99 I do WWI aircraft only (did a few 72nd scale a few years back) in 1/48. I have only done one so far - Eduard Sopwith Triplane-Black Prince. I have always had a great interest in aeroplanes and WWI. Part of that interest comes from the success of Canadians in WWI. I joined the local IPMS (Valour Road Chapter-Winnipeg) in 1999. BTW we have two other WWI (exclusive) builders in our chapter. I look forward to communicating with everyone on the list. It has been quite enjoyable and interesting so far. Regards, Graham ------------------------------ Date: Fri, 30 Jun 2000 11:47:37 -0500 From: "Bill Bacon" To: Subject: Re: Newbie Bio Message-ID: <003901bfe2b2$e644fc40$4d3c32cf@tcac.net> Graham, Welcome from the Texas Panhandle. "Tis a mad house but you will meet great people who will share all they know with you. Lay back, enjoy and most of all, have fun. Cheers, Bill B. ----- Original Message ----- From: Graham Hunter To: Multiple recipients of list Sent: Friday, June 30, 2000 11:43 AM Subject: Newbie Bio > > > Yes, I just subscribed at the beginning of the week. Just a bit about > myself... 37, married, two kids. I started model building when I was 8 (a > Ford Torino Funny Car). I worked with cars for a few years then got into the > mass production of jets, ships and men (army build-up against a couple of > school friends). Started serious building in my mid teen years, anything > from cars to SF space. Then did a stint with armour. I didn't do any > building for a few years and then in late '97 I found a kit of my very first > car ('67 Dodge Coronet) so I got back into the swing. Since Dec.99 I do WWI > aircraft only (did a few 72nd scale a few years back) in 1/48. I have only > done one so far - Eduard Sopwith Triplane-Black Prince. I have always had a > great interest in aeroplanes and WWI. Part of that interest comes from the > success of Canadians in WWI. I joined the local IPMS (Valour Road > Chapter-Winnipeg) in 1999. BTW we have two other WWI (exclusive) builders in > our chapter. I look forward to communicating with everyone on the list. It > has been quite enjoyable and interesting so far. > Regards, Graham > ------------------------------ Date: Fri, 30 Jun 2000 11:49:30 -0500 From: "Mark Shannon" To: Subject: Re: IPMS - Dallas Message-ID: I am hoping to get up there for the weekend, but I have to juggle a few things because my elder son is starting college and there are orientation trips and financial situations. .Mark. ------------------------------ Date: Fri, 30 Jun 2000 13:24:49 -0400 From: "Brad & Merville" To: Subject: Re: Newbie Bio Message-ID: <009901bfe2b8$194b7a60$5a8c5ad1@The_Grenade.Workgroup> Graham Welcome from Toronto. When you get around to doing your "Every Aircraft Ever Flown By William Barker Collection" (if you havn't already) make sure you contact Bob Pearson in Prince Rupert first to ensure complete and total marking authenticity. Brad -----Original Message----- From: Graham Hunter To: Multiple recipients of list Date: Friday, June 30, 2000 12:41 PM Subject: Newbie Bio > > >Yes, I just subscribed at the beginning of the week. Just a bit about >myself... 37, married, two kids. I started model building when I was 8 (a >Ford Torino Funny Car). I worked with cars for a few years then got into the >mass production of jets, ships and men (army build-up against a couple of >school friends). Started serious building in my mid teen years, anything >from cars to SF space. Then did a stint with armour. I didn't do any >building for a few years and then in late '97 I found a kit of my very first >car ('67 Dodge Coronet) so I got back into the swing. Since Dec.99 I do WWI >aircraft only (did a few 72nd scale a few years back) in 1/48. I have only >done one so far - Eduard Sopwith Triplane-Black Prince. I have always had a >great interest in aeroplanes and WWI. Part of that interest comes from the >success of Canadians in WWI. I joined the local IPMS (Valour Road >Chapter-Winnipeg) in 1999. BTW we have two other WWI (exclusive) builders in >our chapter. I look forward to communicating with everyone on the list. It >has been quite enjoyable and interesting so far. >Regards, Graham > > ------------------------------ Date: Fri, 30 Jun 2000 10:30:13 -0700 From: Sean Bayan Schoonmaker To: wwi@pease1.sr.unh.edu Subject: Contour Gauge [?] Message-ID: Hi All, I was wondering who makes these things and where would be a good place to obtain one. "Yes," I know about constructing one out of pencil leads, but I'd like a real one eventually. Thanx, Schoon ------------------------------ Date: Fri, 30 Jun 2000 14:48:23 -0300 From: "dfernet0" To: Subject: RE: Contour Gauge [?] Message-ID: <005301bfe2bb$6406eb40$4640a8c0@ssp.salud.rosario.gov.ar> Schoon: Look if Smallparts (http://www.smallparts.com/) has some. If not, any mechanical instrument shop must carry some different sizes. Wich model scale are you going to use it? The smaller gauges I saw were usually fairly "big" sizes for a 1/72 or 1/48 models. I guess that the smallest sizes avialable would be useful only in 1/32 or 1/24 scale. Anyway, you would find smaller sizes somewhere. Good luck D. PS: I've tought on doing my own contour gauge in a more permanent fashion with clipped pins and a metal clasp, but the locking device is complicated to do it in my home workbench. ----- Original Message ----- From: Sean Bayan Schoonmaker To: Multiple recipients of list Sent: Friday, June 30, 2000 2:36 PM Subject: Contour Gauge [?] > Hi All, > > I was wondering who makes these things and where would be a good place to > obtain one. "Yes," I know about constructing one out of pencil leads, but > I'd like a real one eventually. > > Thanx, > Schoon > > ------------------------------ Date: Fri, 30 Jun 2000 13:56:00 -0400 From: Brian.Nicklas@nasm1.si.edu To: wwi@pease1.sr.unh.edu Subject: Re: Contour Gauge [?] Message-ID: A contour gauge can be found at MicroMark mail order hobby tool warehouse. http://www.micromark.com/ (Search for "contour") But I've seen the same item at a good hardware store. Uses 176 steel wires. Somebody should make one, out of say, plastic rod of a much smaller diameter for smaller models. The steel wire gauge is good for big ship models. R/C and woodwork, but something smaller & more precise would be good for 1/72 & 1/48 (1/144?) ------------------------------ Date: Fri, 30 Jun 2000 19:49:44 +0200 From: "Neil Crawford" To: Subject: VB: Hello world Message-ID: <200006301755.TAA08295@mb03.swip.net> Hi, I just joined, so I thought I should introduce myself. My name is Neil Crawford, I'm originally english but I've lived in Sweden for the last 31 years (of my total of 45) so I'm more Swedish than english. I've been modelling since I was 5, WW1 modelling since I was about 8, I started with an Airfix Bristol Fighter and then the classic dogfight doubles. I joined IPMS in 1972, have been a member of IPMS-UK, IPMS-USA and probably some more, at present I am only a member of IPMS-Sweden and the Racers and record-breaking SIG. I have a collection of about 80 aircraft, mostly 1/72, some 1/144 arliners, about 20 are WW1, so that is one of the reasons I haven't been in touch previously, I just like aircraft I'm not so religious about it , but WW1 does has a special place in my heart. I particuarlly like SPAD's, I have built 13, so far A4,7,11,13,and 16. I also like DeHavillands. One of my lifes ambitions is to build the complete Revell Collectors series, I've done 5 (nearly 6) so far. I work as a computer programmer (mainframes) at Volvo Truck, and live in the country, quite close (by swedish standards) to Marten Tyllstrom. Other interests are gardening,botany, motorbikes and of course my wife. I will try and keep more to the point in the future. Hope to hear from you all. Best regards Neil ps. And just to make my position clear I'm for stainless steel wire and against acrylics! nb: Nieuport 28 (Revell 1/72) nr: Aeroplane Monthly ---------- ------------------------------ Date: Fri, 30 Jun 2000 14:03:44 -0400 From: Matthew Zivich To: wwi@pease1.sr.unh.edu Subject: Re: Fokker cowling Swirls Message-ID: <395CE100.E69ED783@svsu.edu> FWIW, there is a quick way that could be acceptable for some modelers. Put a base coat of silver or any similar metallic color down first. Then stipple tiny dots of aluminum paint over the base coat which should be slightly different in color, and there you have it. Matt Z. Albatrosdv@aol.com wrote: > In a message dated 6/29/00 9:30:33 PM EST, MAnde72343@aol.com writes: > > << Jon. that dremel rubber polishing bit will polish tool steel- it's way too > abrasive for hobby work, I've used it to polish loading ramps on guns. > Merrill > >> > Jon: > > Look at my earlier reply to this thread - you want to do it manually. You > have the right idea but you are far too technological (I know, I know, a > Marine wants the heavy artillery to knock down the building into rubble > before he assaults it...) > > Tom ------------------------------ Date: Fri, 30 Jun 2000 13:11:55 -0500 From: "Matt Bittner" To: "wwi@pease1.sr.unh.edu" Subject: Re: VB: Hello world Message-ID: <200006301811.LAA02998@magpie.a001.sprintmail.com> On Fri, 30 Jun 2000 14:05:52 -0400 (EDT), Neil Crawford wrote: > ps. And just to make my position clear I'm for stainless steel > wire and against acrylics! Well, two out of three ain't bad. ;-) List, watch for an announcement from me regarding Neil's images of his wonderful models. I have them in hand, just have to scan them and post. Matt Bittner ------------------------------ Date: Fri, 30 Jun 2000 11:26:26 -0700 From: Sean Bayan Schoonmaker To: wwi@pease1.sr.unh.edu Subject: RE: Contour Gauge [?] Message-ID: >Look if Smallparts (http://www.smallparts.com/) has some. If not, any >mechanical instrument shop must carry some different sizes. Wich model scale >are you going to use it? The smaller gauges I saw were usually fairly "big" >sizes for a 1/72 or 1/48 models. I guess that the smallest sizes avialable >would be useful only in 1/32 or 1/24 scale. Thanx for the tip; I am looking for something more 1/72 oriented. Schoon ------------------------------ Date: Fri, 30 Jun 2000 14:32:08 EDT From: MAnde72343@aol.com To: wwi@pease1.sr.unh.edu Subject: Re: Contour Gauge [?] Message-ID: <46.777f4a7.268e41a8@aol.com> Schoon, it's a common tool used by cabinetmakers, and other carpenters, a crude, but usable one should be available in any hardware store; a fine brass (and pricey) one is available fron Micro Mark. Merrill ------------------------------ Date: Fri, 30 Jun 2000 15:17:51 -0400 From: Mark Vaughan-Jackson To: wwi@pease1.sr.unh.edu Subject: Re: Contour Gauge [?] Message-ID: Schoon, many hardware stores carry them but the prices vary. I saw one at a Kent Building supply superstore here in Canada for about $30. Then I picked one up for $5 CDN at a discount building supply store. Worth it's weight for detailing a cockpit. MVJ ------------------------------ Date: Fri, 30 Jun 2000 14:54:27 -0500 From: "cameron rile" To: wwi@pease1.sr.unh.edu Subject: Charles Gosse Collection was ( Re: Albatros cook up: the busy cockpit Message-ID: Diego, >Besides, do anyone remembers the URL of Charles Gosse web pages >with the german instrument pictures? http://charlesgosse.home.mindspring.com/ cam AFC - http://members.xoom.com/PointCook/index.htm ______________________________________________________________ Get Your Free E-mail and Homepage at http://www.prontomail.com ------------------------------ Date: Fri, 30 Jun 2000 15:58:27 -0300 From: "dfernet0" To: Subject: RE: Charles Gosse Collection was ( Re: Albatros cook up: the busy cockpit Message-ID: <00ac01bfe2c5$2cf435e0$4640a8c0@ssp.salud.rosario.gov.ar> Thanks, Cam! D. ----- Original Message ----- From: cameron rile To: Multiple recipients of list Sent: Friday, June 30, 2000 3:57 PM Subject: Charles Gosse Collection was ( Re: Albatros cook up: the busy cockpit > Diego, > > >Besides, do anyone remembers the URL of Charles Gosse web pages > >with the german instrument pictures? > > http://charlesgosse.home.mindspring.com/ > > > > > cam > AFC - http://members.xoom.com/PointCook/index.htm > > > > > > ______________________________________________________________ > Get Your Free E-mail and Homepage at http://www.prontomail.com > ------------------------------ Date: Fri, 30 Jun 2000 14:46:19 -0500 From: "Lance Krieg" To: Subject: Re: Albatros cook up: the busy cockpit Message-ID: Diego is on tenterhooks: "I can't decide to close my fuselage without having at least a clue id the Albatros had altimeters,turn/bank indicators/clock into their bussiness office or not." Diego, I perused all the interior Albatros pictures, from D.I through D.Va, that I had. All of the instruments you mentioned would fall into the "optional equipment" range. Apparently, the only required instruments were fuel pressure gauge, rev counter, and a stout heart. Lance ------------------------------ Date: Fri, 30 Jun 2000 21:12:12 +0100 From: Steve Cox To: Subject: Re: Rigging: To Wire or Thread? Message-ID: How do the experts cope with the case where the control horn has two or three wires trailing to the elevator or aileron. I've just done it (with thread) on my PV7 Kitten but it could have been better. Regards Steve =========================================== steve@oldglebe.freeserve.co.uk http://www.oldglebe.freeserve.co.uk/steveshome.html If I didn't spend so much time on line ‹‹ I'd get some models finished ================ > From: "Jack Gartner" > Reply-To: wwi@pease1.sr.unh.edu > Date: Wed, 28 Jun 2000 23:28:06 -0400 (EDT) > To: Multiple recipients of list > Subject: Re: Rigging: To Wire or Thread? > > > ----- Original Message ----- > From: Lance Krieg > To: Multiple recipients of list > Sent: Wednesday, June 28, 2000 10:22 AM > Subject: Re: Rigging: To Wire or Thread? > > >> Jack opines: >> >> "Hmm, I use thread and have never had a real problem with the horns." >> >> I'm refering to the type of horn where the control wire emerges from a > wing surface, travels over the horn, and re-enters, as is common on Sopwith > products. >> >> Sort of: >> >> /|\ >> / | \ >> / | \ > > > That's what I did with my 1 1/2 Strutter using thread and it seems fine. Of > course, a nice touch in 1/48th scale is that the aileron horns had holes > through which the thread could pass. > > Jack Gartner IPMS/USA 30538 > diaphus@tampabay.rr.com > > ------------------------------ Date: Fri, 30 Jun 2000 21:12:16 +0100 From: Steve Cox To: , Subject: Re: Taube - Dove of War Message-ID: > Does anybody know where I could get a copy at a more reasonable price? > You could try these sites Bibliofind booksearch site rec. for old books http://www.bibliofind.com/ ABE Booksellers search site for books, especially second hand http://www.abebooks.com/ Dogbert Books booksearch site http://dogbert.abebooks.com/abe/IList Regards Steve =========================================== steve@oldglebe.freeserve.co.uk http://www.oldglebe.freeserve.co.uk/steveshome.html If I didn't spend so much time on line ‹‹ I'd get some models finished ================ ------------------------------ Date: Fri, 30 Jun 2000 15:25:19 -0500 From: "Bill Bacon" To: Subject: Re: IPMS Nationals in Dallas Message-ID: <001001bfe2d1$4f87b800$4d3c32cf@tcac.net> Marc, If you can put up with an old geezer in a wheel chair, my wife and I will be there and would love to join in. We will be there for the whole show. Cheers, Bill B. ----- Original Message ----- From: Marc Flake To: Multiple recipients of list Sent: Tuesday, June 27, 2000 8:25 AM Subject: IPMS Nationals in Dallas > I ran this on SMML before I went on vacation, and wanted to wait till I > got back to do it over here. > > I'd like to put a list together of WW1 Modelers going to the Nats. SMML > has about 30 going and we're trying to set up a time for a lunch or > Happy Hour meeting. > > You can send your responses to me directly, if you prefer. I'll be in > digest mode (if I can get things worked out) and will update the list at > the end of each day. > > We'll put a list together first, then decide on when we can get > together. > > Marc > ------------------------------ Date: Fri, 30 Jun 2000 16:32:13 -0400 From: " Todd Henry" To: "WWI Mailing List" Subject: A small ot indulgence, if you please Message-ID: <4120006530203213790@earthlink.net> Apologies in advance for the ot posting, but some of you might find this interesting : http://www.home.earthlink.net/~cthenrys/gbh/gbhair/gbhairpic3.jpg It's off-topic, but it is Canadian :-). It's about a baby daughter, her disturbed father, adn her first airplane. Todd Henry (Don't know of any Australian toy aircraft, Shane) --- --- cthenrys@earthlink.net ------------------------------ Date: Fri, 30 Jun 2000 21:42:50 +0100 From: David Fleming To: wwi@pease1.sr.unh.edu Subject: Re: Newbie Bio Message-ID: <395D064A.99F06E94@dial.pipex.com> Graham Hunter wrote: Welcome from Sunny (today at least) Scotland ! This is a friendly bunch of loonies, so enjoy the fun !! David ------------------------------ Date: Fri, 30 Jun 2000 19:16:52 -0400 From: "Brad & Merville" To: Subject: Re: A small ot indulgence, if you please Message-ID: <001801bfe2e9$4733d5e0$8f8c5ad1@The_Grenade.Workgroup> Right On Todd! 20 years and she'll be Snowbird Lead. Then make sure she switches to transports so she can walk into one of those cushy civie airline jobs when her tour's up....or, there's always the mission to Mars. Brad -----Original Message----- From: Todd Henry To: Multiple recipients of list Date: Friday, June 30, 2000 4:31 PM Subject: A small ot indulgence, if you please >Apologies in advance for the ot posting, but some of you might find this >interesting : > >http://www.home.earthlink.net/~cthenrys/gbh/gbhair/gbhairpic3.jpg > >It's off-topic, but it is Canadian :-). It's about a baby daughter, her >disturbed father, adn her first airplane. > >Todd Henry >(Don't know of any Australian toy aircraft, Shane) > > >--- >--- cthenrys@earthlink.net > > > ------------------------------ Date: Sat, 01 Jul 2000 00:30:14 +0100 From: Steve Cox To: Subject: Re: Bristol M1.c Message-ID: There are some M1c pictures on my website, url below Regards Steve nb =========================================== steve@oldglebe.freeserve.co.uk http://www.oldglebe.freeserve.co.uk/steveshome.html If I didn't spend so much time on line ‹‹ I'd get some models finished ================ > From: "Graham Hunter" > Reply-To: wwi@pease1.sr.unh.edu > Date: Thu, 29 Jun 2000 17:30:17 -0400 (EDT) > To: Multiple recipients of list > Subject: Bristol M1.c > > First off thanks Lance for the Tripe offer. I am however not currently > working on a Tripe, I just finished one using the Black Prince markings. > Currently I am working on the Spin Models Bristol M1.c. If any one can tell > me where I can find info on the cockpit (the Windsock Datafile only has two > pics) and the landing carriage please let me know. > Regards, Graham (exclusively 1/48) ------------------------------ End of WWI Digest 2442 **********************