WWI Digest 1383 Topics covered in this issue include: 1) Re: Introducing myself by mbittner@juno.com (Matthew E Bittner) 2) Re: GRUMMAN F3F AND ACCURATE MINIATURES by "K. Hagerup" 3) Re: windsock magazine by REwing@aol.com 4) Re: Ebay by "Gerald P. McOsker" 5) Le nouveau garcon by "Gerald P. McOsker" 6) Re: getting plastered wasRe: GRUMMAN F3F AND ACCURATE MINIATURES by "David R.L. Laws" 7) Re: Introducing myself by Dennis Ugulano 8) Re: Just How Fast Does This Guy Build Anyway? by Dennis Ugulano 9) Re: windsock magazine by Dennis Ugulano 10) Re: Alan ClarkRe: WWI model - MOVING CONTROL SURFACES by "David R.L. Laws" 11) Re: Le nouveau garcon by Yves Buffetaut 12) Re: Huggins Site! by Pedro e Francisca Soares 13) Re: Ebay by "David R.L. Laws" 14) Re: Ebay by Mike Fletcher 15) Re: getting plastered wasRe: GRUMMAN F3F AND ACCURATE MINIATURES by Mike Fletcher 16) Re: Introducing myself + booklet by Mike Fletcher 17) Re: GRUMMAN F3F AND ACCURATE MINIATURES by "David R.L. Laws" 18) Re: Ebay by "David R.L. Laws" 19) Ebay by Mike Fletcher 20) Re: Ebay Names by "David R.L. Laws" 21) Re: Ebay by Mike Fletcher 22) RE: Ebay by Shane Weier 23) Re: getting plastered wasRe: GRUMMAN F3F AND ACCURATE MINIATURES by "David R.L. Laws" 24) Re: Ebay by "Charles or Linda Duckworth" 25) Re: getting plastered wasRe: GRUMMAN F3F AND ACCURATE MINIATURES by KarrArt@aol.com 26) Re: Alan ClarkRe: WWI model - MOVING CONTROL SURFACES by KarrArt@aol.com 27) TC Resins 1/48 Felixstowe by Bob Pearson 28) Re: Ebay by Modelhound@aol.com 29) Re: Ebay by Zulis@aol.com 30) Re: Introducing myself by John & Allison Cyganowski 31) Re: Ebay by "David R.L. Laws" 32) Re: Introducing myself by Carlos Valdes 33) Re: Ebay by Zulis@aol.com 34) RE: Ebay by Dave Watts 35) Re: Introducing myself by Dave Watts 36) Re: Ebay by Kevin Wenker 37) RE: Ebay by Dave Watts 38) Ebay Name Update by Fernando Lamas ---------------------------------------------------------------------- Date: Wed, 13 Jan 1999 16:47:12 -0600 From: mbittner@juno.com (Matthew E Bittner) To: wwi@pease1.sr.unh.edu Subject: Re: Introducing myself Message-ID: <19990113.165106.-846677.0.mbittner@juno.com> On Wed, 13 Jan 1999 15:17:20 -0500 (EST) Yves Buffetaut writes: >Dear List members, >I'm new today on your list. I'm the president of the French >Association >1914-1918, a full-time writer and a contributor in some model >magazines >in France : Steelmaster (on tanks) and Wingmaster (on aeroplanes). >I'm >well introduced in the French military archives and I can be of some >help about all the French weapons. I go at least every three months >to >the IWM and Public Record Office at Kew. Oh... As one who enjoys building French WW1 subjects, you will have my undying attention! :-) Matt Bittner ___________________________________________________________________ You don't need to buy Internet access to use free Internet e-mail. Get completely free e-mail from Juno at http://www.juno.com/getjuno.html or call Juno at (800) 654-JUNO [654-5866] ------------------------------ Date: Wed, 13 Jan 1999 16:49:48 -0600 From: "K. Hagerup" To: wwi@pease1.sr.unh.edu Subject: Re: GRUMMAN F3F AND ACCURATE MINIATURES Message-ID: <369D230C.4159@prodigy.net> Shane Weier wrote: > > Hi, > > > > Unless you're Eldon and alter certain items just a little...;-) > > > > Or Flashback. > > There is, of course, a big difference between pirating a mould and using one > someone else used before you. One is illegal, the other - assuming you now > own or lease the mould - is not > > Shane I'm not well versed enough in the heritage of specific molds, and wasn't really trying to impune the motives of Flashback. It would probably make an interesting research project to document the family relationsips of the some of the more popular kit subjects over the years. I think the original Revell 1/72 kits of the 60's have begat a variety of clones and near clones, including Eldon, ESCI and Academy Minicraft. More recently, Czechmaster seems to have been the inspiration for a lot of kits. Ken ------------------------------ Date: Wed, 13 Jan 1999 18:15:39 EST From: REwing@aol.com To: wwi@pease1.sr.unh.edu Subject: Re: windsock magazine Message-ID: <22e31e43.369d291b@aol.com> << At 10:52 AM 13/01/99 -0500, you wrote: >Since I concentrate almost exclusievely on WWI aeroplanes at present, I >am contemplating subscribing to Windsock magazine. What are the best >sources to obtain this publication? Is it best to order directly from >the UK? How much is it? >> I get mine from Wise Owl. I don't have their address handy, but they usually advertise in most modeling mags. I get mine usually before the folks who order direct get theirs. The packages are well cushioned and the magazine and Datafile are in mint condition. I'm quite satisfied with their service. -Rick- ------------------------------ Date: Wed, 13 Jan 1999 18:48:26 -0500 From: "Gerald P. McOsker" To: wwi@pease1.sr.unh.edu Subject: Re: Ebay Message-ID: > Mike asks- would it be possible for anyone on ebay to > post their respective ebay names? > Mine is amadonRI Where do you find the model and book stuff- I'm sort of stuck in WWI memorabilia? Cheese Gerry "A cavalry charge is very like ordinary life. So long as you are all right, firmly in your saddle, your horse in hand and well armed, lots of enemies will give you wide berth." WS Churchill ------------------------------ Date: Wed, 13 Jan 1999 18:54:27 -0500 From: "Gerald P. McOsker" To: wwi@pease1.sr.unh.edu Subject: Le nouveau garcon Message-ID: Yves- Bienvenue! Enfin- un maitre aux chose francais- Je suis au IWM pendant la semaine Fev 15-19- Peut etre? Gerry "A cavalry charge is very like ordinary life. So long as you are all right, firmly in your saddle, your horse in hand and well armed, lots of enemies will give you wide berth." WS Churchill ------------------------------ Date: Thu, 14 Jan 1999 10:09:10 +0000 From: "David R.L. Laws" To: wwi@pease1.sr.unh.edu Subject: Re: getting plastered wasRe: GRUMMAN F3F AND ACCURATE MINIATURES Message-ID: <369DC246.3292@webtime.com.au> Robert Thanks for the further info Any special release agent used with the form mould - cooking oil those sorts of things or just whack the moulding compound directly onto the plastic ? CBunny ------------------------------ Date: Wed, 13 Jan 1999 18:52:24 -0500 From: Dennis Ugulano To: "wwi@pease1.sr.unh.edu" Subject: Re: Introducing myself Message-ID: <199901131852_MC2-668E-587C@compuserve.com> Yves, Welcome to our group. I have been here only about a month and the information that goes back and forth is amazing. I am very sure you will enjoy it here. Dennis Ugulano email: Uggies@compuserve.com ------------------------------ Date: Wed, 13 Jan 1999 18:52:23 -0500 From: Dennis Ugulano To: "wwi@pease1.sr.unh.edu" Subject: Re: Just How Fast Does This Guy Build Anyway? Message-ID: <199901131852_MC2-668E-587B@compuserve.com> Robert, >> That's it, I've finally flipped out and become middle aged. I admit it.(but I still wanna keep all my old records) << It happens to all of us. Here I am, the eternal youth, will soon qualify for a senior citizens card. That can't be. In my mind I can still leap tall buildings, but my foot hangs up on the third floor. Dennis Ugulano email: Uggies@compuserve.com ------------------------------ Date: Wed, 13 Jan 1999 18:52:22 -0500 From: Dennis Ugulano To: "wwi@pease1.sr.unh.edu" Subject: Re: windsock magazine Message-ID: <199901131852_MC2-668E-5879@compuserve.com> Michael, >> I am contemplating subscribing to Windsock magazine. << There are two ways to subscribe. I get mine direct from UK. Pay the extra money for air mail if you are on this side of the pond or it will take 60 days to get to you. Albatros Productions Ltd 10 Long View Berkhamsted, herts HP4 1BY In the US you can get it from Wise Owl Worldwide Publications 4314 West 238th St Dept WS Torrance, Ca 90505 Dennis Ugulano email: Uggies@compuserve.com ------------------------------ Date: Thu, 14 Jan 1999 10:12:16 +0000 From: "David R.L. Laws" To: wwi@pease1.sr.unh.edu Subject: Re: Alan ClarkRe: WWI model - MOVING CONTROL SURFACES Message-ID: <369DC300.667F@webtime.com.au> KarrArt@aol.com wrote: > > The book SCRATCHBUILT! has several of his works, including a metal clad Vickers Viking airliner......ooooooohhh, and though not a metal bird, the book also has his horrifically ugly-beautiful Vickers Victoria. > Robert K. High Praise oh master !! BTW Are you any the wiser as to when the second volume of this delicious bit of bed-time reading is comming out CB ------------------------------ Date: Thu, 14 Jan 1999 00:56:03 +0200 From: Yves Buffetaut To: wwi@pease1.sr.unh.edu Subject: Re: Le nouveau garcon Message-ID: <369D2472.76C2@club-internet.fr> Dear Gerry, Unfortunately, I'm not going to the IWM in February, but probably in March. Anyway, thanks for your welcome. Yves ------------------------------ Date: Wed, 13 Jan 1999 22:16:45 +0000 From: Pedro e Francisca Soares To: wwi@pease1.sr.unh.edu Subject: Re: Huggins Site! Message-ID: <369D1B4D.4A4DB904@mail.telepac.pt> John Huggins wrote: > > As you can > see. there has been no bleeding or yellowing on the white. The BR > Decals are and have always been top notch. > > John Just a point here: I used BR decals on my recently built Fokker DR1 and I agree that they are extremely well printed and very easy to use. Still the white on my decals was very transparent, to the point of the surroundings to the fuselage crosses completely disappearing over the yellow. What I did was to overpaint the white on with white ink, and that cured the problem. I'm glad that the crosses are pretty straight shapes to paint though, a more elaborate marking would be much harder and probably not within my reach. Maybe it was just bad luck and I had a defective sheet, and don't get me wrong, I was very happy with the end result, but if any of you ever use the same sheet beware... another 2o eurocents, former tostoes Pedro ------------------------------ Date: Thu, 14 Jan 1999 10:27:38 +0000 From: "David R.L. Laws" To: wwi@pease1.sr.unh.edu Subject: Re: Ebay Message-ID: <369DC69A.355C@webtime.com.au> Mike Fletcher wrote: > > due to my not recognizing a fellow list member on Ebay I bid for a few books already being bid upon - would it be possible for anyone on ebay to post their respective ebay names? > > Mike Fletcher > Nieuport29 Civil idea Mike and thoroughly within the spirit of the List > David Laws > furzball ------------------------------ Date: Wed, 13 Jan 1999 16:12:17 -0800 From: Mike Fletcher To: wwi@pease1.sr.unh.edu Subject: Re: Ebay Message-ID: <369D3661.590AF792@mars.ark.com> you'll have to use more advanced searches - paste this in as the url (complete or it won't work right) http://search.ebay.com/cgi-bin/texis/ebay/results.html?cobrandpartner=x&maxRecordsReturned=300&maxRecordsPerPage=50&textonly=n&query=%2B%28aeroplane%2Cairplane%2Caircraft%2Caerocraft%29+%2B%28ww1%2Cwwi%2Cwar%29+-ashtray&SortProperty=MetaEndSort -- Mike Fletcher ___ ., mdf@mars.ark.com |-\|^----! ; mikef@sparc.nic.bc.ca |--n--""*" icq=19554083 @ ------------------------------ Date: Wed, 13 Jan 1999 16:13:28 -0800 From: Mike Fletcher To: wwi@pease1.sr.unh.edu Subject: Re: getting plastered wasRe: GRUMMAN F3F AND ACCURATE MINIATURES Message-ID: <369D36A8.20A7819A@mars.ark.com> cooking oil will affect the surface characteristics of the mold - much better is graphite powder - nothing will stick to it and it is very thin. -- Mike Fletcher ___ ., mdf@mars.ark.com |-\|^----! ; mikef@sparc.nic.bc.ca |--n--""*" icq=19554083 @ ------------------------------ Date: Wed, 13 Jan 1999 16:17:55 -0800 From: Mike Fletcher To: wwi@pease1.sr.unh.edu Subject: Re: Introducing myself + booklet Message-ID: <369D37B3.8A167BAF@mars.ark.com> already got to him! hope you enjoy this list Yves - It is a much more interesting list that that overly scholarly hitory list. btw anyone who wants scans of the Nieuport booklet send me your email addresses. Matthew E Bittner wrote: > > On Wed, 13 Jan 1999 15:38:59 -0500 (EST) KarrArt@aol.com writes: > > >You'll find a wide assortment of crazy, generous people on this list! > >(and > >watch out for the Nieuport fanatics) > > > > Matt Bittner > > ___________________________________________________________________ > You don't need to buy Internet access to use free Internet e-mail. > Get completely free e-mail from Juno at http://www.juno.com/getjuno.html > or call Juno at (800) 654-JUNO [654-5866] -- Mike Fletcher ___ ., mdf@mars.ark.com |-\|^----! ; mikef@sparc.nic.bc.ca |--n--""*" icq=19554083 @ ------------------------------ Date: Thu, 14 Jan 1999 10:40:27 +0000 From: "David R.L. Laws" To: wwi@pease1.sr.unh.edu Subject: Re: GRUMMAN F3F AND ACCURATE MINIATURES Message-ID: <369DC99B.37DE@webtime.com.au> Shane Weier wrote: > There is, of course, a big difference between pirating a mould and using one someone else used before you. One is illegal, the other - assuming you now own or lease the mould - is not > > Shane Basically correct - Taking the mould may be illegal too - Howefer, and to straighten the recors on List - My nefarious plans invlove moulding off substantially ***corrected*** parts - Eg the AMT DH 4 wings which are hopeless on rib spacings and control surface defintion - Once corrected ( and let's face there's just so much of the sheltered work-shop exercise of sanding and re-skinning any sane bod can tackle without going quite mad ! ) I'd like to do a small "run " for a few DH 9/ 9A's Another potential use with which I've been toying will appeal to anyone whose done wooden boat-building by the " cold-moulding " method- doing real wood " ply " fuselages off a female mould - ASny specialist work on thuis kind of boat building will reveal the methiod and that, ( subject to being able to lay one's grubby paws on, or make really thin veneers ) it's not as difficult or crazy as it may at first sound ! david ------------------------------ Date: Thu, 14 Jan 1999 10:43:29 +0000 From: "David R.L. Laws" To: wwi@pease1.sr.unh.edu Subject: Re: Ebay Message-ID: <369DCA51.3F3C@webtime.com.au> MACFARB@aol.com wrote: > > In a message dated 99-01-13 15:38:16 EST, you write: > > << would it be possible for anyone on ebay to > post their respective ebay names? >> and to post those names as additions to re-mails on ONE list to save trawling and cutting and pasting ? > MACFARB David Laws - furzball Alan Wright - aew ? Braille_scaler etc ... ------------------------------ Date: Wed, 13 Jan 1999 16:27:51 -0800 From: Mike Fletcher To: wwi@pease1.sr.unh.edu Subject: Ebay Message-ID: <369D3A07.62A9F1E6@mars.ark.com> So this is all? There is lots of nifty stuff on eBay - just be careful to make sure you know what its worth to you. for future reference then... aew = Allan Wright amadonRI = Gerry McOsker braille_scale_modeler = Paul A. Schwartzkopf cam27 = Cameron Riley JastaElf = Sharon Henderson hagerupk = K. Hagerup MACFARB = MacFarb Nieuport29 = Mike Fletcher (there was already a Nieuport on eBay!) phoward@abilene.com = P. Howard -- Mike Fletcher ___ ., mdf@mars.ark.com |-\|^----! ; mikef@sparc.nic.bc.ca |--n--""*" icq=19554083 @ ------------------------------ Date: Thu, 14 Jan 1999 10:45:32 +0000 From: "David R.L. Laws" To: wwi@pease1.sr.unh.edu Subject: Re: Ebay Names Message-ID: <369DCACD.14C2@webtime.com.au> K. Hagerup wrote: > > hagerupk > > (no imagination) Oh contraire ! It so obvious no one would really believe it's you ! ------------------------------ Date: Wed, 13 Jan 1999 16:33:35 -0800 From: Mike Fletcher To: wwi@pease1.sr.unh.edu Subject: Re: Ebay Message-ID: <369D3B5F.B7097608@mars.ark.com> very interesting collection of german pre-ww1 and ww1 postcards - ebay item# 55885161 -- Mike Fletcher ___ ., mdf@mars.ark.com |-\|^----! ; mikef@sparc.nic.bc.ca |--n--""*" icq=19554083 @ ------------------------------ Date: Thu, 14 Jan 1999 10:35:18 +1000 From: Shane Weier To: "'wwi@pease1.sr.unh.edu'" Subject: RE: Ebay Message-ID: Mike, > So this is all? Nope. > for future reference then... > aew = Allan Wright > amadonRI = Gerry McOsker > braille_scale_modeler = Paul A. Schwartzkopf > cam27 = Cameron Riley > JastaElf = Sharon Henderson > hagerupk = K. Hagerup > MACFARB = MacFarb > Nieuport29 = Mike Fletcher (there was > already a Nieuport on eBay!) > phoward@abilene.com = P. Howard fighter2 = Shane Weier ------------------------------ Date: Thu, 14 Jan 1999 10:54:08 +0000 From: "David R.L. Laws" To: wwi@pease1.sr.unh.edu Subject: Re: getting plastered wasRe: GRUMMAN F3F AND ACCURATE MINIATURES Message-ID: <369DCCD0.4F49@webtime.com.au> Mike Fletcher wrote: > > cooking oil will affect the surface characteristics of the mold - much > better is graphite powder - nothing will stick to it and it is very > thin. For those who don't any scources for graphite - Auto accessory shops are a good place to get this power - often sold as " graphite grease " Thanks Mike david ------------------------------ Date: Wed, 13 Jan 1999 18:43:29 -0600 From: "Charles or Linda Duckworth" To: Subject: Re: Ebay Message-ID: <199901140036.SAA00317@mail.primary.net> Mine's cduckworth, between office and home I didn't need another Userid to remember.... ---------- > From: Mike Fletcher > To: Multiple recipients of list > Subject: Ebay > Date: Wednesday, January 13, 1999 6:27 PM > > So this is all? There is lots of nifty stuff on eBay - just be careful > to make sure you know what its worth to you. > > for future reference then... > aew = Allan Wright > amadonRI = Gerry McOsker > braille_scale_modeler = Paul A. Schwartzkopf > cam27 = Cameron Riley > JastaElf = Sharon Henderson > hagerupk = K. Hagerup > MACFARB = MacFarb > Nieuport29 = Mike Fletcher (there was already a Nieuport on eBay!) > phoward@abilene.com = P. Howard > -- > Mike Fletcher ___ ., > mdf@mars.ark.com |-\|^----! ; > mikef@sparc.nic.bc.ca |--n--""*" > icq=19554083 @ ------------------------------ Date: Wed, 13 Jan 1999 19:34:33 EST From: KarrArt@aol.com To: wwi@pease1.sr.unh.edu Subject: Re: getting plastered wasRe: GRUMMAN F3F AND ACCURATE MINIATURES Message-ID: In a message dated 1/13/99 3:53:52 PM Pacific Standard Time, laws@webtime.com.au writes: << Robert Thanks for the further info Any special release agent used with the form mould - cooking oil those sorts of things or just whack the moulding compound directly onto the plastic ? CBunny >> CBunny: To get the plaster out of the Pfalz shell, I just gently torqued the plastic and out popped the cured plaster, with no release agent applied before hand. My first experimental pour, I got impatient, and the plaster wasn't 100% set, sos the mess cracked in several places. Robert K. ------------------------------ Date: Wed, 13 Jan 1999 19:34:35 EST From: KarrArt@aol.com To: wwi@pease1.sr.unh.edu Subject: Re: Alan ClarkRe: WWI model - MOVING CONTROL SURFACES Message-ID: <6ec25703.369d3b9b@aol.com> In a message dated 1/13/99 3:56:32 PM Pacific Standard Time, laws@webtime.com.au writes: << The book SCRATCHBUILT! BTW Are you any the wiser as to when the second volume of this delicious bit of bed-time reading is comming out CB >> Looking for June so it can hit the market just before the IPMS USA nats. Should have a few nifty items, including at least a couple of on-topic dealies! Robert K. ------------------------------ Date: Wed, 13 Jan 1999 16:40:53 -0800 From: Bob Pearson To: WW1 Mailing list Subject: TC Resins 1/48 Felixstowe Message-ID: <199901140040.QAA15302@spare.rapidnet.net> Greetings all, Well it arrived today .. the TC Resins 1/48 Felixstowe kit . . . I am both happy and sad to say I am supposed to build this monster for a future Internet Modeler (sometime next century). As many of you are aware I have had a 1/48 Lonestar vacform of the same kit going for the past two years (okay, I worked on it for a week or three). Anyway here is a brief description of the contents . . . - Resin two-piece hull. Some piting. The design of the hull is such that the wing celleule is constructed and then trapped between the two hullpieces - Wings have nice thin trailing edges, but excessive rib detail. They are in mulitple panels and have location tabs similiar to the Aeroclub FE2b. Top wing is in five panels and lower in three. There are also both types of ailerons. Heavy flow gates on LE and some chips out of various LE or TEs on wings and tail surfaces - Engines would have been nice except they are very heavily pitted and I will use the LoneStar ones instead - Struts are thick PE Brass, I may use the Lonestar metal ones - Metal Lewis guns and Scarff ring. The LoneStar has PE details for these, as well as a much more comprehensive white metal package - Resin docking trolly. On the whole it looks buildable .. more so then the LoneStar, and using the two should provide me with one decent kit. . . Regards, Bob Pearson Visit my WW1 aviation page at (temporarily down) http://www.kaien.com/~bpearson/Index.htm Managing Editor / Internet Modeler http://www.avsim.com/mike/awn/ ------------------------------ Date: Wed, 13 Jan 1999 19:33:21 EST From: Modelhound@aol.com To: wwi@pease1.sr.unh.edu Subject: Re: Ebay Message-ID: <95b82d23.369d3b51@aol.com> My ebay name is the same as my e-mail name "modelhound" Mike Franklin ------------------------------ Date: Wed, 13 Jan 1999 20:01:44 EST From: Zulis@aol.com To: wwi@pease1.sr.unh.edu Subject: Re: Ebay Message-ID: <165e24a4.369d41f8@aol.com> In a message dated 1/13/99 3:02:18PM, you write: << due to my not recognizing a fellow list member on Ebay I bid for a few books already being bid upon - would it be possible for anyone on ebay to post their respective ebay names? Mike Fletcher Nieuport29 >> With Pleasure, Mike. I am Vulture2 on ebay - and very active lately. :-) Dave Zulis ------------------------------ Date: Wed, 13 Jan 1999 19:51:11 -0500 From: John & Allison Cyganowski To: wwi@pease1.sr.unh.edu Subject: Re: Introducing myself Message-ID: <369D3F7F.4D9C@worldnet.att.net> Hello Yves, I recall that there was quite a discussion about the 37mm cannon puteaux on the list recently. We were interested in what kind of round it fired. John Cyg. ------------------------------ Date: Thu, 14 Jan 1999 10:58:46 +0000 From: "David R.L. Laws" To: wwi@pease1.sr.unh.edu Subject: Re: Ebay Message-ID: <369DCDE6.1861@webtime.com.au> Mike Fletcher wrote: > > So this is all? There is lots of nifty stuff on eBay - just be careful > to make sure you know what its worth to you. > > for future reference then... > aew = Allan Wright > amadonRI = Gerry McOsker > braille_scale_modeler = Paul A. Schwartzkopf > cam27 = Cameron Riley > JastaElf = Sharon Henderson > hagerupk = K. Hagerup > MACFARB = MacFarb > Nieuport29 = Mike Fletcher > phoward@abilene.com = P. Howard > furzball = David Laws > -- > Mike Fletcher ___ ., > mdf@mars.ark.com |-\|^----! ; > mikef@sparc.nic.bc.ca |--n--""*" > icq=19554083 @ ------------------------------ Date: Wed, 13 Jan 1999 20:12:39 -0500 From: Carlos Valdes To: wwi@pease1.sr.unh.edu Subject: Re: Introducing myself Message-ID: <369D4487.7723@conted.gatech.edu> Welcome aboard, Yves! Carlos ------------------------------ Date: Wed, 13 Jan 1999 20:09:00 EST From: Zulis@aol.com To: wwi@pease1.sr.unh.edu Subject: Re: Ebay Message-ID: <93e9b65a.369d43ac@aol.com> In a message dated 1/13/99 7:39:21PM, you write: << > So this is all? There is lots of nifty stuff on eBay - just be careful > to make sure you know what its worth to you. > > for future reference then... > aew = Allan Wright > amadonRI = Gerry McOsker > braille_scale_modeler = Paul A. Schwartzkopf > cam27 = Cameron Riley > JastaElf = Sharon Henderson > hagerupk = K. Hagerup > MACFARB = MacFarb > Nieuport29 = Mike Fletcher (there was already a Nieuport on eBay!) > phoward@abilene.com = P. Howard > Vulture2 = Dave Zulis Sorry... didnt come across your format request until later.... DZ ------------------------------ Date: Wed, 13 Jan 1999 20:07:49 -0500 From: Dave Watts To: wwi@pease1.sr.unh.edu Subject: RE: Ebay Message-ID: <199901140116.UAA02944@sam.on-net.net> aew = Allan Wright amadonRI = Gerry McOsker braille_scale_modeler = Paul A. Schwartzkopf cam27 = Cameron Riley cduckworth = Charles Duckworth fighter2 = Shane Weier fokker = David Watts furzball = David Laws hagerupk = K. Hagerup JastaElf = Sharon Henderson MACFARB = MacFarb modelhound = Mike Franklin Nieuport29 = Mike Fletcher phoward@abilene.com = P. Howard Here we are so far, in alphabetical order. Best bidding! Dave W. ------------------------------ Date: Wed, 13 Jan 1999 20:10:24 -0500 From: Dave Watts To: wwi@pease1.sr.unh.edu Subject: Re: Introducing myself Message-ID: <199901140119.UAA03055@sam.on-net.net> Welcome Yves, With your credentials, we can use the added dignity. ;-) Best Wishes, and an extended hearty hand clasp. Dave Watts ------------------------------ Date: Wed, 13 Jan 1999 19:26:18 -0600 From: Kevin Wenker To: wwi@pease1.sr.unh.edu Subject: Re: Ebay Message-ID: <369D47BA.250CC95F@interaccess.com> One more: winks147 = Kevin Wenker Mike Fletcher wrote: > So this is all? There is lots of nifty stuff on eBay - just be careful > to make sure you know what its worth to you. > > for future reference then... > aew = Allan Wright > amadonRI = Gerry McOsker > braille_scale_modeler = Paul A. Schwartzkopf > cam27 = Cameron Riley > JastaElf = Sharon Henderson > hagerupk = K. Hagerup > MACFARB = MacFarb > Nieuport29 = Mike Fletcher (there was already a Nieuport on eBay!) > phoward@abilene.com = P. Howard > -- > Mike Fletcher ___ ., > mdf@mars.ark.com |-\|^----! ; > mikef@sparc.nic.bc.ca |--n--""*" > icq=19554083 @ ------------------------------ Date: Wed, 13 Jan 1999 20:18:46 -0500 From: Dave Watts To: wwi@pease1.sr.unh.edu Subject: RE: Ebay Message-ID: <199901140127.UAA03434@sam.on-net.net> aew = Allan Wright amadonRI = Gerry McOsker braille_scale_modeler = Paul A. Schwartzkopf cam27 = Cameron Riley cduckworth = Charles Duckworth fighter2 = Shane Weier fokker = David Watts furzball = David Laws hagerupk = K. Hagerup JastaElf = Sharon Henderson MACFARB = MacFarb modelhound = Mike Franklin Nieuport29 = Mike Fletcher phoward@abilene.com = P. Howard Vulture2 = Dave Zulis ------------------------------ Date: Wed, 13 Jan 1999 17:37:15 -0800 From: Fernando Lamas To: wwi@pease1.sr.unh.edu Subject: Ebay Name Update Message-ID: <3.0.6.32.19990113173715.007f3500@olympus.net> After some pasting and addition, here is the latest list of eBay names. > > for future reference then... > > aew = Allan Wright > > amadonRI = Gerry McOsker > > braille_scale_modeler = Paul A. Schwartzkopf > > cam27 = Cameron Riley > > JastaElf = Sharon Henderson > > hagerupk = K. Hagerup > > MACFARB = MacFarb > > Nieuport29 = Mike Fletcher > > phoward@abilene.com = P. Howard > > Vulture2 = Dave Zulis > furzball = David Laws lejeune = Fernando Lamas ------------------------------ End of WWI Digest 1383 **********************